Other

This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

The tool-free Maxle Ultimate Front brings exceptional stiffness and durability to your ride in a high clamping force, easiest-to-use internal cam thru-axle system.

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 28mm - Width: 7mm

Zipp Speed Weaponry Cartridge Bearings

- Includes 61803 (1) and 61903 (1) bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Note: 88 front and 188v9 rear hubs are on all 2014 and newer Zipp 202, 303, 404, 808 - One kit required for: Zipp Super-9, 900 tubular and Sub-9 disc rear hubs

- Includes 61903 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings

- Includes 61803 bearings and one grease syringe - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - These 61803 bearings are not interchangable with the 88/188 hub 61803 bearings

Zipp Speed Weaponry Vuka Extension End Plugs - Plastic bar end plug pair for 22.2mm extensions

- Plastic bar end plug pair for 22.2mm extensions

ZIPP Service Course Bar End Plugs, Qty 2.

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. Vuka extensions are designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner. Designed with input from top bike fitters, the shape of the Vuka Alumina Evo is crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position. - Clean internal cable routing for easy installation - Length: 360mm

Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. Vuka extensions are designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner. Vuka Alumina Race Extensions feature 52mm of rise, along with a bend that places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Clean internal cable routing for easy installation

The perfect bike fit needs to blend slippery aerodynamics and a comfortable, stress-free body position while optimizing control over the bike. Top fitters are constantly devising new methods to maximize and balance these goals. Designed using feedback from top fitters, Zipp’s Vuka Carbon Extensions give you all the options needed to optimize your position and go for the win or your personal best: Vuka Carbon Evo extensions decrease drag by starting airflow over the body sooner while keeping the arms and wrists in a comfortable, relaxed position. The Evo shape, with a 20mm inward roll and multi-radius bend, is constructed using carbon fiber, allowing for even more complex shaping and lighter weight. - Compatible with all 22.2mm clip-on systems - Material: Unidirectional carbon - Internal cable routing - Length: 380mm

Vuka Alumina Clip Risers are designed for use with the Vuka Alumina Clip's above-bar option. The risers are designed to offer a wider range of adjustability within the Vuka Alumina aero-cockpit system.

The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large, redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Designed with input from top bike fitters, the shape of the Vuka Evo Extensions are crafted to feel as if the rider is shaking hands with the bar. This is achieved through the use of a multi-radius bend paired with a 20mm inward roll of the bar that can be adjusted to dial in fit and achieve an ideal position. - Bar-setting fit, security, and adjustability - Extension material: Unidirectional carbon

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Shims for fitting 25.4mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 25.4mm - Length: 48mm - Machined Aluminum - Anodized Black

Shims for fitting 26.0mm diameter handlebars to 31.8mm clamp diameter stems. - Outside Diameter: 31.8mm - Inside Diameter: 26.0mm - Length: 44mm - Machined Aluminum - Anodized Black

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 20 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

- Allows the use of a 7 speed shimano cassette on an 8 or 9 speed shimano cassette body

Wheels Manufacturing Angled Spacer Single Speed Conversion Kit is a Shimano- and SRAM-compatible single speed conversion kit with ramped spacers. Additional spacers are included to dial-in chainline. Includes: - (2) - 9mm angled spacers - (6) - 3mm spacers - (2) - 1mm shims - (1) - lockring - (1) - 16t cog Compatible with: - Any 1/2 x 1/8 pitch chain, this includes BMX and Track chains - Any 8 or 9-speed chain * Does not work acceptably with 10 or 11-speed chains

BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

- All Wheels Manufacturing replacement derailleur hangers are produced in Colorado to exacting tolerances. - CNC machined 6061 aluminum Black anodized finish

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (3) M4x10 Flat Head Screws Note: Wheels Mfg DROPOUT-145 is interchangeable with Wheels Mfg DROPOUT-218. #145 has three fasteners, where #218 has two.